Troubleshooting - EDIFIER Extreme Connect MP260 User Manual

Folder depth:
File format:
Bluetooth Specification:
Version:
Supposed profiles:
Max transmit range:
Speaker Specification:
Active drivers:
Passive driver:
Product Dimension:
Net Weight:
Gross Weight:
Page 12

Troubleshooting

● Ensure the EDIFIER Extreme Connect is fully charged.
● Switch the EDIFIER Extreme Connect off then on and reconnect to the audio source.
● Ensure the audio format of the music in your Micro SD card is MP3 or WMA.
● Ensure Bluetooth function is enabled compatible on your Bluetooth devices.
● Move the devices closer and retry the connection.
● When connect via Bluetooth
● Try another Bluetooth device for connection.
● If pairing with a laptop or a computer, please select the EDIFIER Extreme Connect as the audio output device.
● When connected via 3.5mm stereo input, your phone/device may distort the audio signal if turned up too loud. Turn
down the volume on your phone/device before adjusting the volume on EDIFIER Extreme Connect.
If you have any further questions or concerns regarding Edifier Products...
Asia, Europe, Oceania:
Please visit our website at: www.edifier.com, or email Edifier Support for further assistance at:
main@edifier.com,
è Dear Customer, thank you for purchasing this Edifier product. For the Edifier warranty applicable for this product,
we refer you to the Edifier website www.edifier-international.com/warranty-terms.
Canada/USA/Mexico: www.edifier.ca, Email:
(If you prefer, you may contact us by phone, Toll Free: 1-877-EDIFIER (334-3437) in Canada, 1-800-688-7406 in
US.
South America: Please visit
contact information.
7 classes
MP3/WMA
V2.1+ EDR
A2DP, AVRCP
10M or 30FT
2 × 1¾ inch (48mm), magnetically shielded, 4ohm
50mm × 90mm
159.4(W) × 61(H) × 42(D) mm
Approx. 0.42kg
Approx. 0.56kg
, it's best to turn the volume fully up on both your device and the speaker.
®
service@edifier.ca
www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for detailed local