Usb Audio Instruction For Pc Users (Windows Xp); 3.5Mm Stereo Line-In; Technical Information - EDIFIER Extreme Connect MP260 User Manual

USB audio Instruction for PC Users (Windows XP)

Step 1:
Step 2:
Step 3:
Click "Sounds, Speech, and Audio Devices" Ú "Sounds, and Audio Devices"
Page 10 Operational guide

3.5mm Stereo line-in

Ú Press until the top indicator is green.
Ú Connect the 3.5mm-3.5mm Audio cable to the "LINE IN" port.
Ú Play the connected device and adjust the volume to a desired level.
*************************************************************************************************************************************
Page 11

Technical information

Power output:
Signal to noise ratio:
Frequency response:
Input sensitivity:
Adjustment:
Input type:
Micro SD card specification:
MAX capacity:
Disk Format:
Connect the EDIFIER Extreme to your PC with the USB cable.
Step 4: Set the Hardware: "EDIFIER Extreme Connect", then click "OK".
Step 5: Open audio medium and play. Adjust the volume to a desired level.
green
RMS 2W×2 (THD+N=10%, f
≥85 dBA
190Hz~18KHz (@+/-6db)
500mV ± 50mV (THD+N=1%)
Buttons on the top of speaker
Bluetooth/Micro SD/USB audio/AUX (3.5mm stereo)
32GB
FAT32
Click "Start" Ú "Setting" Ú"Control Panel"
=1KHz)
0