Interrupting The Alarm; Activating And Deactivating The Alarm; Timer Mode - Grundig Ocean Boy 70 Instructions Manual

:
6 2 1
:
6 2 1
e
1 0 0 6
FM
.
4
M
MHz
9 0
O
3 0
O
0
O
OPERATION
_______________________________________________

Interrupting the alarm

Press »SNOOZE« while the alarm is sounding.
1
– Display: »e« or »
– The alarm (signal tone or radio) stops.
– The alarm goes on again at 5-minute intervals (the total alarm time is
90 minutes).
Cancelling the alarm for the day
Press »ON/OFF« while the alarm is sounding.
1
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but the alarm function remains
activated for the next day at the set time.

Activating and deactivating the alarm

Press »ALARM« to switch off the alarm function.
1
– Display: »e« or »
– The set alarm time is saved.
Press »ALARM« to reactivate the alarm function.
2
– Display: »e« or »

Timer mode

The device possesses a sleep timer, which switches it off in radio mode at a
preset time. It is possible to set the switch-off time in 10 minute steps up to
90 minutes.
Switching on the sleep timer
1 Press »SLEEP« to switch on the device.
– Display: » « and » 9 0 «.
– You will hear the radio station last selected.
To set the switch-off time (90, 80, 70, 60, 50, 40, 30, 20, 10), press
2
»SLEEP« as many times as necessary.
– Display: » «, briefly, for example » 3 0 «, then the frequency.
Note:
Briefly press »SLEEP« to check the remaining switch-off time.
Switching off the sleep timer
1 To switch off the sleep timer early, keep pressing »SLEEP« until » 0 «
briefly appears in the display.
– Display: » « disappears from the display.
– The device switches off.
or
Switch off the device by pressing »ON/OFF«.
« flash.
«.
« disappears.
«.
25