Grundig Ocean Boy 70 Instructions Manual page 8

1 0 0 6
FM
.
8
M
MHz
9 6 9
FM
. .
MHz
8 8 9
FM
.
M MHz
SETTINGS
___________________________________________________
Setting and storing radio stations
When the device is first connected to the mains or the batteries are first
inserted, the device begins an automatic FM station search and stores the
first 20 stations with strong signals on the preset buttons
You can stop this search by pressing »MEM.«.
However, you can also tune stations manually and store them on the preset
buttons.
Tuning to radio stations manually or automatically
Press »ON/OFF« to switch on the device.
1
– You will hear the radio station last selected.
Press »BAND« to select the frequency band.
2
Keep pressing »TUNING
3
frequency you want.
– Display: the frequency changes in steps of 50 kHz (FM)
or
Press »TUNING –« or
– Display: the automatic search stops at the next station with a strong
signal.
Storing radio stations
You can store up to 20 radio stations on the preset buttons
5/10«.
1 Press »BAND« to select the frequency band.
2 Press »TUNING –« or
3 Press »MEM.« to activate the memory function.
– Display: »M« flashes.
Note:
If you do not press any button within 5 seconds, the device will quit
memory mode without making any changes.
–« or »TUNING
»TUNING +« for approximately one second.
»TUNING +« to tune to a station.
»1/6 ...
5/10«.
+« until you reach the
»1/6 ...
21