Playing A Source With Hdmi Connection; Playing An Ipod; Playing Back Files Stored On An Ipod - Pioneer VSX-1020-K Operating Instructions For The User

Basic playback
Playing a source with HDMI
connection
• Use INPUT SELECT to select the HDMI
input you've connected to (for example,
HDMI 1).
You can also perform the same operation by
using the INPUT SELECTOR dial on the front
panel or by pressing HDMI on the remote
control repeatedly.
• Set the HDMI parameter in Setting the
Audio options on page 69 to THROUGH if
you want to hear HDMI audio output from
your TV (no sound will be heard from this
receiver).
• If the video signal does not appear on your
TV, try adjusting the resolution settings on
your component or display. Note that some
components (such as video game units)
have resolutions that may not be
converted. In this case, use an analog
video connection.
Note
1 • This system is compatible with the audio and video of the iPod nano (audio only for the iPod nano 1G/2G), iPod fifth
generation (audio only), iPod classic, iPod touch and iPhone. However, some of the functions may be restricted for
some models. The system is not compatible with the iPod shuffle.
• Compatibility may vary depending on the software version of your iPod and iPhone. Please be sure to use the latest
available software version.
• iPod and iPhone are licensed for reproduction of non-copyrighted materials or materials the user is legally permitted
to reproduce.
• Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the equalizer
off before connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any
inconvenience or loss of recorded material resulting from the iPod failure.
2 • The controls of your iPod will be inoperable when connected to this receiver.
• VSX-1020 only: The sub zone OSD screen shows the same content as the main zone GUI screen. Note, however, that
characters other than alphanumeric letters and numbers cannot be displayed and will be replaced by #.
• VSX-920 only: iPod/USB function cannot be selected for the MULTI-ZONE feature (page 74).
3 • Note that characters that cannot be displayed on this receiver are displayed as #.
• This feature is not available for photos on your iPod. To display photos, switch iPod operation to the iPod (see
Switching the iPod controls on page 48).

Playing an iPod

This receiver has the iPod/iPhone/USB
terminal that will allow you to control playback
of audio content from your iPod using the
controls of this receiver.
1 Switch on the receiver and your TV.
See Connecting an iPod on page 35.
• It is also possible to operate the iPod on
the iPod itself, without using the TV
screen. For details, see Switching the iPod
controls on page 48.
2 Press iPod USB on the remote control to
switch the receiver to the iPod/USB.
Loading appears in the GUI screen while the
receiver verifies the connection and retrieves
data from the iPod.
When the display shows the iPod top menu
you're ready to playback from the iPod.

Playing back files stored on an iPod

To navigate songs on your iPod, you can take
advantage of the GUI screen of your TV
connected to this receiver.
control all operations for music in the front
panel display of this receiver.
1
2
3
You can also
05
47
En