Automatically Conducting Optimum Sound Tuning (Auto Mcacc) - Pioneer VSX-1020-K Operating Instructions For The User

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-1020-K:
Table of Contents

Advertisement

Available languages

Available languages

Basic Setup
Automatically conducting
optimum sound tuning (Auto
MCACC)
The Auto MCACC Setup measures the
acoustic characteristics of your listening area,
taking into account ambient noise, speaker
connection and speaker size, and tests for both
channel delay and channel level. After you
have set up the microphone provided with your
system, the receiver uses the information from
a series of test tones to optimize the speaker
settings and equalization for your particular
room.
Make sure you do this before moving on to
Playing a source on page 46.
Important
• Make sure the microphone and speakers
are not moved during the Auto MCACC
Setup.
• Using the Auto MCACC Setup will
overwrite any existing settings for the
MCACC preset you select.
• Before using the Auto MCACC Setup, the
headphones should be disconnected.
CAUTION
• The test tones used in the Auto MCACC
Setup are output at high volume.
®
THX
THX is a trademark of THX Ltd., which may be
registered in some jurisdictions. All rights
reserved.
Note
1 Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make accurate
measurement impossible:
• Sofas or other soft surfaces.
• High places such as tabletops and sofa tops.
2 If you leave the GUI screen for over five minutes, the screen saver will appear.
1
Switch on the receiver and your TV.
2
Connect the microphone to the MCACC
SETUP MIC jack on the front panel.
Make sure there are no obstacles between the
speakers and the microphone.
CONTROL
ON / OFF
iPod
iPhone
MCACC
USB
SETUP MIC
If you have a tripod, use it to place the
microphone so that it's about ear level at your
normal listening position. If you do not have a
tripod, use some other object to install the
1
microphone.
The Full Auto MCACC display appears once
the microphone is connected.
1a.Full Auto MCACC
A/V RECEIVER
: Normal ( SB/FH )
Speaker System
EQ Type
: SYMMETRY
MCACC
: M1.MEMORY 1
THX Speaker
:
Exit
MASTER
VOLUME
VIDEO CAMERA
HDMI 5
VSX-1020
Microphone
Tripod
2
NO
START
Return
04
41
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-920-k

Table of Contents