The Other Setup Menu; Volume Setup - Pioneer VSX-1020-K Operating Instructions For The User

The System Setup and Other Setup menus

The Other Setup menu

The Other Setup menu is where you can make
customized settings to reflect how you are
using the receiver.
RECEIVER
1 Press on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
2 Select 'System Setup' from the Home
Menu.
3 Select 'Other Setup', then press ENTER.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
• HDMI Setup – Synchronizes this receiver
with your Pioneer component supporting
Control with HDMI (see HDMI Setup on
page 65).
• Volume Setup – Sets up the volume-
related operations of this unit (see below).
• Remote Control Mode Setup – Sets this
receiver's remote control mode (page 108).
• Flicker Reduction Setup – Adjusts the way
the GUI screen looks (page 108).
• Pairing Bluetooth Setup – Used to pair a
Bluetooth ADAPTER and Bluetooth
wireless technology device (page 54).
5 Make the adjustments necessary for each
setting, pressing RETURN to confirm after
each screen.

Volume Setup

You can set the maximum volume of this
receiver or specify what the volume level will
be when the power is turned on.
1 Select 'Volume Setup' from the Other
Setup menu.
2 Select the Power ON Level setting you
want.
The volume can be set so that it is always set
to the same level when the receiver's power is
turned on.
• LAST (default) – When the power is turned
on, the volume is set to the same level as
when the power was last turned off.
• "---" – When the power is turned on, the
volume is set to minimum level.
• –80.0dB to +12.0dB – Specify the volume
to be set when the power is turned on, in
steps of 0.5 dB.
It is not possible to set a volume level greater
than the value specified at Volume Limit setup
(see below).
3 Select the Volume Limit setting you
want.
Use this function to limit the maximum
volume. The volume cannot be increased
above the level set here, even by operating
MASTER VOLUME button (or the dial on the
front panel).
• OFF (default) – The maximum volume is
not limited.
• –20.0dB/–10.0dB/0.0dB – The maximum
volume is limited to the value set here.
4 Select the Mute Level setting you want.
This sets how much the volume is to be turned
down when MUTE is pressed.
• FULL (default) – No sound.
• –40.0dB/–20.0dB – The volume will be
turned down to the level specified here.
5 When you're finished, press RETURN.
You will return to the Other Setup menu.
11
107
En