Table of Contents
Advertisement
- You have moved out of range of the network.
- Turn off power management.
Modem Problems
The modem does not work.
- Make sure that the modem driver is correctly installed.
- Make sure that the telephone line is properly connected.
- Make sure that the COM port in the communication software is correctly set.
- Turn off power management.
PC Card Problems
The PC card does not work.
- Make sure that the PC card is correctly seated.
- If the card requires an IRQ (Interrupt ReQuest), make sure that there is one available.
The PC card stops communicating properly.
- The application may have been reset when the computer is turned off or in Standby mode. Exit and restart the application.
Power Management Problems (for Windows)
The computer does not enter Standby or Hibernation mode automatically.
- If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection
is actively in use.
- Make sure that the Standby or Hibernation time-out is enabled.
The computer does not enter Standby or Hibernation mode immediately.
- If the computer is performing an operation, it normally waits for the operation to finish.
The computer does not resume from Standby or Hibernation mode.
- The computer automatically enters Standby or Hibernation mode when the battery pack is empty. Do any one of the
following:
- Connect the AC adapter to the computer.
- Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F12 hot keys.
- Make sure that the Hibernation function is specified for the sleep button.
- You might be using a PC card that prevents the computer from entering Hibernation mode. To enter the mode, stop the
communication program and then remove the card or stop the card.
Software Problems
An application program does not work correctly.
- Make sure that the software is correctly installed.
- If an error message appears on the screen, consult the software program' s documentation for further information.
- If you are sure the operation has stop, reset the computer.
Sound Problems
No sound is produced.
- Make sure that the volume control is not set too low.
- Make sure that the audio driver is correctly installed.
- Make sure that the computer is not in Standby mode.
PRESTIGIO NOBILE 150
31
Advertisement
Table of Contents
