Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK T937 Operating Manual

Removing and installing components during servicing

Attaching the cover

2
1
► Put the cover back in place (1).
► Fasten the screw (2).
► Complete the installation, see "Finishing component removal", Page 95.

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "Inserting battery", Page 47).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu 95