Table of Contents
Advertisement
Removing and installing components during servicing
Attaching the cover
► Place the cover into position, following the direction of the arrow (1).
When installing the cover, you must use the correct screws.
If you install the wrong screws, components may be damaged.
► Fasten the cover in place with the screw (2).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
54
2
"Inserting battery", Page
1
32).
Fujitsu
Advertisement
Table of Contents
