Installing A Memory Module; Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK S936 Operating Manual

Removing and installing components during servicing

Installing a memory module

1

Attaching the cover

► Place the cover into position, following the direction of the arrow (1).
► Fasten the cover in place with the screw (2).
► Complete the memory extension, see

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
70
2
a
"Installing a battery", Page
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
Memory module Memory expansion
► Carefully push the memory module
downwards until you feel it click
into place (2).
2
2
1
"Finishing component removal", Page
36).
70.
Fujitsu