Installing Systemlock - Fujitsu LIFEBOOK T937 Operating Manual

Security functions

Installing SystemLock

InstallingSystemLock
During initial installation, the first SmartCard becomes the Admin SmartCard. Together with
the PUK, it has all access rights, and should therefore be kept in a safe place. It can only
be used by the authorised user (administrator), e.g. to initialise user cards.
You need an Admin SmartCard if you want to set up a user group. You use the
Admin SmartCard to add further systems to the user group.
Setting up the first system in a user group or a stand-alone
system for use with SystemLock
User groups
► Start the device and call up BIOS Setup.
► From the Security menu, choose the option SmartCard SystemLock.

The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Install Single PC
Install Group PC
► Insert a new SmartCard in the reader and press Enter.
70
Not Installed
[Enter]
[Enter]
Enter PIN:
Item Specific Help
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
[ ]
required for a
permanent installation.
Fujitsu