Adding A System To A User Group - Fujitsu LIFEBOOK T937 Operating Manual

► If you do not want to initialise any further SmartCards, press
SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances!
Keep the SmartCard and PIN/PUK in a safe place and protect
them from unauthorised access.

Adding a system to a user group

SystemLock2
► Start the device.
► Call up BIOS Setup and select the SmartCard SystemLock page from the Security menu.

The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Install Single PC
Install Group PC
► Insert the Admin SmartCard for the user group.

Enter PIN:
► Enter the PIN.

When the following appears:
• ACCESS DENIED = You have confirmed the PIN incorrectly. You are then requested to
enter and confirm the new PIN again. After three failed attempts, the SmartCard will
be blocked and can then only be activated again by entering the PUK.
Enter the PUK:
Fujitsu
Not Installed
[Enter]
[Enter]
Enter PIN:
and remove the Admin
Esc
Item Specific Help
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
[ ]
required for a
permanent installation.
Security functions
73