Error message/cause
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
Real time clock error
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
System battery is dead - Replace and run SETUP
System cache error - Cache disabled
System timer error
Restoring the contents of the hard disk
under Windows
Restoring the system under Windows 10
If necessary, you can reset your system to the original state of the hard disk.
► Beginning at the right edge of the Windows Start screen or the desktop, use a
finger to sweep over the screen to open the Action Centre.
► Select All settings.
► Select Update & security.
► Select Recovery.
► Select according to your requirements from the options given.
Fujitsu
Resolution
► Press the
F1
function key when prompted
to do so.
► Contact your sales outlet or our customer
service centre.
► Contact your sales outlet or our customer
service centre.
► Contact your sales outlet or our customer
service centre.
► Contact your sales outlet or our customer
service centre.
► Contact your sales outlet or our customer
service centre.
Troubleshooting and tips
107