Tom - Tronic - Native Instruments MASCHINE STUDIO Manual

For more information on engines, see
Drumsynth. For general information on the Snare and the other Drumsynths, see
Drumsynths – General
10.5.1 Tom – Tronic
The Tronic engine is the default engine of the Tom.
A fat, analog-style tom with two tunable oscillators plus a tunable FM oscillator.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
Main Page
Element
MAIN Section
Engine
Tune
Decay
↑10.1.1, Engines: Many Different Drums per
Handling.
↑9.4, The Plug-in Strip for more information on this.
Description
Selects the engine used in the Tom Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 36.00 to
60.00. The default value is 36.00. For more details see
Pitch Range, Tuning, and MIDI
Adjusts the duration of the sound's tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
↑10.5, The Toms.
Notes.
MASCHINE STUDIO - Manual - 596
Using the Drumsynths
The Toms
↑10.1,
↑10.1.5,