Advertisement
QuickSpecs
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Ethernet Mezzanine
Options
HP Fibre Channel
Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port Gigabit Server Adapter
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a
10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps
when not connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre
Channel over Ethernet). Note that a HP Virtual Connect profile takes precedence over
the setting in this menu. Also, some FlexFabric Adapters may require that network boot
be enabled in order to configure the protocol. If the protocol is configured without
enabling network boot with certain FlexFabric Adapters, the protocol may not take
effect. Once the protocol has taken effect on the first boot after configuring this option,
network boot may be disabled if desired.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
4Gb Fibre Channel Mezzanines
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
8Gb Fibre Channel Mezzanines
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
DA - 13654 North America — Version 25 — December 4, 2012
HP ProLiant BL465c Generation 7 (G7) Server Blade
416585-B21
445978-B21
447883-B21
453246-B21
467799-B21
539857-B21
581204-B21
580151-B21
610609-B21
613431-B21
403621-B21
403619-B21
456972-B21
451871-B21
590647-B21
Page 21
Advertisement
