Rename Channels; Rearrange Channels; Test Digital Reception - Philips 32PFL3605H/12 User Manual

Rename channels

You can rename channels. The name appears
when you select the channel.
1
When watching TV, press OK to display
the channel grid.
2
Select the channel to rename.
3
Press OPTIONS.
»
The channel options menu appears.
4
Press to select [Rename channel],
then press OK.
»
A text input box appears.
5
Press to select characters.
6
Press OK to confirm each character.
7
Select [Done], then press OK to finish
renaming channels.
Tip
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.

Rearrange channels

After you install channels, you can rearrange the
order in which they appear.
1
When watching TV, press OK to display the
channel grid.
2
Press OPTIONS.
»
The channel options menu appears.
3
Press to select [Reorder], then press OK.
4
Select the channel to rearrange, then press
OK.
»
The selected channel is highlighted.
5
Press to move the highlighted channel
to the desired location, then press OK.
6
Press OPTIONS.
» [Done reordering] appears on the screen.
7
Press OK to confirm.
8
Press BACK to exit the channel grid.

Test digital reception

You can check the quality and signal strength of digital
channels. This allows you to reposition and test your
antenna or satellite dish.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Manual channel search].
3 Press to enter the menu.
4 Press to enter the frequency of
the channel you want to test.
5 Press OK to confirm the frequency, then
press OK again to confirm [Search].
6 When complete, select [Store] to store
the frequency.
Note
• If the signal quality and strength is poor,
reposition the aerial or satellite dish and retest.
•
If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
EN 29