Store Tv Channels - Philips 50PF9956/37 Owner's Manual

Store "IV channels
Autoprogram
Install _ Antenna
Automatic
Cable
Install 0_0 Start
O Select Autoprogram in the Install menu.
Press the cursor down to select Install mode.
Press the cursor right.
Note: It is recommended to keep the predeflned
Automatic ,way of autopro_Iramming, In case of
di_culties in autopmgramming with the automatic
method choose for Antenna or Cable whether
antenna or cable signals are present.
When Automatic is selected, theTV will
automatically detect whether or not cable
signal input is present.
When Antenna is selected, theTV will detect
antenna signals and will search for all antenna
TV channels available in your local area.
When Gable is selected, the TV will detect
cable signals and will search for all cable TV
channels available in your local area.
0
Press the cursor down to select Install.
Note:All channels must be unlocked in order to
autoprogr_m, If requested enter your PIN code to
unlock all channels. (See Channels in the TV menu,
p. 12,)
O
Press the cursor right.
O The message Searching appears and the
progress of autoprogramming is displayed.
When Autoprogramming is complete, the puck
navigates to Stop, A message appears
confirming the completion together with the
total number of channels found.
Note: when you navigate to Stop before
autopmgrurnming is complete, you are given the
option to continue.
Available channels:
- with cable: max. from 1 to 125
- off air: max. from 2 to 69
Note: In case a particular channel is too weak for
the autopmgrumming to identi_ after installation is
complete, you should tune to that channel by using
the digit buttons on the remote control.
If the channel is not acquired, a message will
appear that the channel is not available.
TV
Settings
Demo
Install
ource
The General menu allows you to change settings that will
typically be accessed only occasionally.
The Clock menu allows you to use your TV as a clock.
For the correct working of On timer and lock after features,
helps you select the correct option.
The Source menu allows you to select a source.
General
General
Settings O_ )---O---O
Menu background
Surf
Reset AV settings
Caption Service
OSD
Set/Change pin
Subwoofer
Menu background
Select
Menu Background
with the cursor down
and press
the
cursor right.
Select On or Off to turn the menu background on or off.
Surf
Select
Surf.
With the cursor left/right, select
• 2 channels if you want the SURF button to toggle between the
current and the previously selected channel,
• 9 channels if you want the SURF button to summon a list of
up to 9 channels which can be selected.
To add/remove a channel or source to the 9 channels list:
Tune to the channel or source you wish to add or remove.
Press the SURF button and press the cursor right to add or
remove.
Note: If there are already 9 channels/sources in the list, the one at
the bottom of the list will be removed