Use Your Tv; Switch Your Tv On / Off Or To Standby; Switch Channels - Philips 32PFL3605H/12 User Manual

4 Use your TV

This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
To switch on
• If the standby indicator is off, press
(Power) at the side of the TV.
• If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote
control.
»
The standby indicator switches to red.
To switch off
• Press (Power) at the side of the TV.
»
The standby indicator switches off.
Tip
•
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
•
If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.

Switch channels

• Press P +/- on the remote control or
P/CH +/- on the side of the TV.
• Enter a channel number using the
Numeric buttons.
• Press OK to use the channel grid.
• Press BACK P/P on the remote
control to return to the previous channel.
Note
•
When you use a favourite list, you can only
select those channels in the list (see 'Select a
favourite list' on page 16).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1
Press OK.
»
The channel grid appears.
2
Press to select and preview a
channel.
3
Press OK to watch the selected channel.
EN 9