Cleaning With Attachments - WERTHEIM SE 9500 User Manual

InStructIonS For uSE
Before You Begin cleaning (cont'd)
cArPEt clEAnInG (con'd)
13. After cleaning, you may want to turn the Custom Clean dial to rinse to give
your carpeting a final water only rinse. This will ensure thorough removal of
embedded dirt loosened by the deep cleaning formula.
14 15
14. Remove the tank from the base of the machine by lifting up on the tank
carry handle. Carry like a bucket to a utility sink or outside where you will
dispose of the dirty water.
15. Unlatch the top of the tank from the bottom by lifting up on the tank
latch which is located on the back of the tank.
16. Remove the top of the tank by lifting up on the handle. Note how the lip on
the top tank separates from the groove in the bottom tank. This placement
is important when putting the tank back together.
17. Lift the bottom portion of the tank; pour
17
out dirty water toward the sink through the
triangular shaped opening in the corner of the
tank. You may notice hair & debris deposits on
the carpet or in the tank that were loosened
by the cleaning action (especially with newer
carpets that have never been deep cleaned
before). This debris should be picked up and
thrown away.
14
(cont'd)
16
18. Fill the heavy duty bladder with hand
18
warm tap water. Remember to secure
the tank latch in the back and test to
make sure it is secure before picking
up the tank. Always check the level of
cleaning formula in the formula tank at
the same time, and refill as needed.
19. Water rinse (optional). Rinsing is an optional step that can be done
during the cleaning process by switching from one of the clean
settings on the Custom Clean dial to a water rinse setting, or it can
be done after the carpeted area has been cleaned. Simply choose
the water rinse setting on the Custom Clean dial, and follow the
same path as you did for cleaning, taking care to do a forward
(wet) stroke by depressing the spray trigger, a backward (wet)
stroke, and a forward and backward (dry) stroke, releasing the
spray trigger. Continue this until the water you see coming up the
nozzle is clear.
20. CleanShot. CleanShot is an optional feature that can be used to
fight tough stains. It can be used as either a tough stain pre-cleaner
or can be used during the deep cleaning process itself. To use
CleanShot either as a pre-cleaner or during deep cleaning, follow
the instructions on page 9.

cleaning with Attachments

to rEducE thE rISK oF InjurY, BE ExtrA cArEFul WhEn
clEAnInG StAIrS. EnSurE mAchInE IS SEcurE And lEVEl.
do not oVEr-WEt
Your SE9500 machine comes equipped with a hose and at least one
attachment for cleaning stairs, upholstery, and more.
15