Installing The Raid Utility - Buffalo HD-QLU3R5 User Manual

Installing the RAID Utility

The Utility is used to build a RAID array. If the RAID Utility is not installed, install it by following the
procedure below.
Note: The procedure below is not necessary if the RAID Utility is already installed.
■ Windows
1
Load the Utility CD in the computer.
DriveNavigator will start. If it does not start automatically, double-click the CD-ROM drive icon in the
Utility CD from [Computer (My Computer)].
2
Click [Begin Installation].
3
The license agreement screen is displayed. Click [I accept] to proceed.
4
Click [Additional Software installation].
5
Select [RAID Utility], then click [Install].
Follow the on-screen instructions to complete the installation process.
■ Mac OS Ⅹ
1
Double-click "RaidUtility.dmg" in the "Mac" folder in the Utility CD.
2
Double-click the RaidUtility disk that was extracted to the Desktop.
3
Copy the
The installation process is now complete.
To start the RAID Setting Utility, double-click
Caution
Do not delete the
will no longer be able to run the RAID Setting Utility. If you accidentally delete it, recopy it
from the Utility CD.
18
HD-QLU3 User Manual
(RaidUtility) from the RaidUtility disk to the Desktop.
(
RaidUtility) that was copied to the Desktop. If it is deleted, you
(RaidUtility) on the Desktop.