Related Manuals for Buffalo MiniStation HD-PZFU3
Summary of Contents for Buffalo MiniStation HD-PZFU3
- Page 1 MiniStation HD-PZFU3 User Manual Europe: www.buffalo-technology.com Asia Pacific: www.buffalo-asia.com 35020742-02 2015.11...
-
Page 2: Table Of Contents
Contents Diagrams .................2 Specifications ..............3 Software Installation ............3 Recommended Usage ............4 Dismounting the Unit .............5 For Windows ..................5 For Mac ....................5 Troubleshooting .............6 I can see the MiniStation in Computer (PC) but I cannot access it (Windows) ..................6 I cannot see the MiniStation ............6 My backup program cannot save files to the MiniStation ....6... -
Page 3: Diagrams
Diagrams Power/Access LED Idle: White Active: Blinking white When HD-PZFU3 is in encrypted mode Locked: Orange USB Cable USB Connector Anti-Theft Security Slot Note: To make the drive water resistant, connect the USB cable to the drive properly and close the anti-theft security slot with the cover. -
Page 4: Specifications
Specifications Check Buffalo's website for information on the latest products and compatible models. Interface USB 3.0 Connector USB 3.0 Micro-B Transfer speed 5 Gbps maximum (USB 3.0) External dimensions 90 x 141 x 21 mm; 3.54" x 5.55" x 0.83" (excluding protruding parts) Power 5 V ±... -
Page 5: Recommended Usage
Recommended Usage To avoid damage to data, never do any of the following while data is being accessed: - unplug the cables - turn off your computer - put your computer into standby, hibernate, or sleep mode Never configure this unit as a destination for virtual memory. The maximum size of a file on a FAT32 drive is 4 GB. -
Page 6: Dismounting The Unit
If the power/access LED does not turn off when you turn off your computer, unplug the USB cable from the drive. Some computers do not support power saving mode. Before using this unit with a Mac, reformat it with Mac OS Extended using the disk utility in Mac OS. Dismounting the Unit If your computer is turned on, please follow the procedure below to unplug the unit. -
Page 7: Troubleshooting
(Windows) The drive may require formatting. Try using DiskFormatter2. Diskformatter2 and its manual are available from http://d.buffalo.jp/hd-pzfu3/. I cannot see the MiniStation Verify that the power LED is on. If it is not, check the cable. The MiniStation should be connected to your computer by a USB cable.