Mitsubishi Electric MELSEC-Q/L Programming Manual page 141

• Rounding error may occur when specifying single-precision real or double-precision real type data to (s) by programming
tool.
For precautions when setting an input value using a programming tool, refer to the following.
 MELSEC-Q/L/F Structured Programming Manual (Fundamentals)
■Operation result
• Function without EN/ENO
An operation is executed and the operation value is output from (d).
• Function with EN/ENO
The following table shows the executing conditions and operation results.
EN
TRUE (Operation execution)
FALSE (Operation stop)
*1 When FALSE is output from ENO, the data output from (d) is undefined. In this case, create a program so that the data output from (d) is
not used.
Operation error
• No operation error occurs.
Program example
■MOVE(_E)
The program which moves the word (signed) type data input to (s) to (d).
• Function without EN/ENO (MOVE)
[Structured ladder/FBD]
[ST]
g_int2:= MOVE(g_int1);
• Function with EN/ENO (MOVE_E)
[Structured ladder/FBD]
[ST]
g_bool3 := MOVE_E(g_bool1, g_int1, g_int2);
ENO
TRUE
*1
FALSE
(d)
Operation output value
Undefined value
5 APPLICATION FUNCTIONS
5.3 Standard Arithmetic Functions
5
139