Service Position; Service Hints; Diagnostic Software - Yamaha DVD-S520 Service Manual

DVD-S520/DV-S5450

SERVICE POSITION

See figure 1 for the service position
1. Remove the cables from the cable tie housing.
2. Remove 4 screws that mount the DVD module to the
bottom frame.
3. Move the DVD module backward slightly and flip the
module over, so that the component side of the board
faces upwards, and the module is in the service
position.

SERVICE HINTS

Diagnostic software

In chapter "Diagnostic software", some tests are refering
to the SCART functionality.
These tests are for sets with RGB-output.
For sets without RGB-output, no SCART connector is
mounted.
In these sets, the SCART tests will automatically be
skipped.
9
Fig. 1