Epson SureColor P5000 User Manual page 167

LCD screen message Condition/solution
Paper Setting Error
Press the
paper from the paper cassette. Print using the front or rear manual feeder,
This paper cannot be
depending on the paper thickness.
loaded from paper
cassette. Insert paper
less than 0.8 mm
thickness from rear
manual feeder.
Paper Setting Error Pull out the roll paper and select a roll paper option from the Paper Type
menu.
Roll paper is loaded.
Remove it and change
paper source to roll
paper.
Paper Skew The paper is not loaded straight. Press the
the pressure roller, then load the paper correctly.
Load paper properly.
Borderless Error Check the following:
Load a supported paper
• Press the
size or load paper
correctly.
• Make sure the paper is not wavy or curled.
• Load paper in the correct position depending on the paper type.
• Change the Paper Size Check setting to On.
Cleaning Error Select Yes. Replace any ink cartridges with low ink with new ones to
continue cleaning. After cleaning, you may reinstall the original cartridge and
Not enough ink.
use it until it is expended.
Continue cleaning?
Nozzle Clog Detected
Not enough ink.
Continue cleaning?
Cleaning Error The printer nozzles are still clogged even after running the automatic head
cleaning. Select Yes to run another automatic head cleaning.
Automatic head cleaning
failed. Retry?
pause/cancel button and select Job Cancel, then remove the
pause/cancel button and select Job Cancel, then eject the
paper. Load the correct size of paper.
167
load paper button to release