Epson SureColor P5000 User Manual page 170

LCD screen message Condition/solution
SpectroProofer Error See the SpectroProofer documentation for details on the displayed error
code.
See documentation for
how to solve the
problem.
(error code)
SpectroProofer Error Turn off the printer and make sure the SpectroProofer mounter is connected
correctly. Wait a moment, then turn on the printer again.
Connect cable of
SpectroProofer then See the SpectroProofer mounter documentation for details.
restart printer.
SpectroProofer Error Turn off the printer and remove the color measurement device from the
SpectroProofer. Reinstall it correctly, then turn on the printer again.
Refer to the manual and
connect the ILS to See the SpectroProofer UVS documentation for details.
SpectroProofer. Turn
the printer power off,
and then on again.
F/W Install Error The firmware updated did not install.
Firmware update failed. Turn off the printer, wait for awhile, and turn on the printer again. Run the
firmware update again.
Restart the printer.
If the message still appears, contact Epson for support.
Maintenance Request A part used in the printer is nearing the end of its service life. Contact Epson
for support and provide them with the displayed maintenance request code.
Replace Part
The error persists until you replace the requested part.
Soon/Replace Part Now
(maintenance request
code)
170