ATTO Technology FibreBridge 6500N Installation And Operation Manual page 25

8-gigabit fibre channel to 6-gigabit sas bridge
Table of Contents

Advertisement

This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio
disturbance may arise. If such trouble occurs, the user may be required to take corrective actions.
Japan Electronics and Information Technology Industries Association (JEITA) Power
Cable Statement
Translation of JEITA Power Cable notice:
Do not use power cord with other products.
Compliance Statement, Korea
Translation of Korean Compliance Statement:
This is a Class A device and is registered for EMC requirements for industrial use. The seller or buyer
should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a
residential-use type.
The ATTO FibreBridge 6500N complies with Directive 2002/95/EC on the Restriction of
the Use of Hazardous Substances in Electrical and Electronic Equipment (RoHS) and
take the following exemptions:
5 - Lead in glass of cathode ray tubes, electronic components and fluorescent tubes.
7a - Lead in high melting temperature type solders (i.e. lead based alloys containing
85% by weight or more lead).
7C - Lead in electronic ceramic parts (e.g. piezoelectronic devices)
13 - Lead and cadmium in optical and filter glass
x

Advertisement

Table of Contents
loading

Table of Contents