Use an Ethernet connection to use the ATTO ExpressNAV System Manager interface. Make sure all cables are
anchored securely at both ends with the proper connectors.
Serial port connections
The ATTO FibreBridge supports remote service
operations over the RS-232 serial port using standard
terminal emulation software available with most
systems.
Connect a RJ45 to DB-9 serial cable (null modem)
between the ATTO FibreBridge serial port and one of
the computer's serial COM ports.
Exhibit A-1 Cable Pinouts
i
ATTO Technology Inc. FibreBridge Installation and Operation Manual
Appendix A
Cabling
Ethernet connections
The 100/1000 BaseT Ethernet ports provide remote
monitoring and management using the ATTO
ExpressNAV interface.
Since the FibreBridge is set to auto mdix, there is no
need for a crossover cable when connecting directly to
a computer. The ATTO FibreBridge auto detects the
Ethernet speed by default.