5
Once the Ready prompt appears, type
ZMODEM RECEIVE. The FibreBridge displays
that it is preparing to receive a file from your
terminal program.
6
On the terminal program, choose Transfer
Send File.
7
In the Send File box, enter the current
FibreBridge .ima file or click the browse button
to find it.
8
Click Send File. Wait approximately 35 minutes
for the transfer to complete.
9
The FibreBridge acknowledges receiving the
file and displays a message not to interrupt
power for 2 minutes wile the file is being written
to flash. Once the message "ZMODEM
Transfer Complete" is displayed with the
Ready prompt, type firmwarerestart.
Note
Until you issue firmwarerestart, the firmware
update is not complete.
10 It is highly recommended that you repeat the
firmware update process so that the backup
image is replaced with up-to-date firmware.
11