Maintenance
Grounding Wire Repair
If the grounding wire breaks at the spool end,
perform the following steps:
1.
Unwind wire from grounding spool and
use a flat screwdriver to pry apart the
grounding spool.
ti30560a
2.
Loosen screw on terminal and remove
broken wire. Strip insulation from
grounding wire, insert into terminal and
tighten screw.
ti30561a
30
3.
Snap the grounding spool back together.
If the grounding wire breaks at the
grounding plug, perform the following
steps:
1.
Pull rubber boot off of wire at grounding
plug and slide boot over grounding wire.
2.
Loosen screw and remove broken wire.
Insert stripped grounding wire and
tighten screw.
3.
Replace rubber boot onto grounding
plug.
ti30563a
3A4803A