Table of Contents
Advertisement
1. Insert the battery, bottom end first, into the battery com-
partment.
2. Carefully, press the battery top downward until it clicks
and locks in place.
3. Place the HC700-G inside the cradle - the Status LED
inside the Power button shows steady red. Charge the
battery until the status LED shows steady green.
The HC700-G cradle charges the battery most effectively
when it is at room temperature [approx. 68°F (20°C)]. The
ambient temperature range during battery charging should be
32°F to 95°F (0
Checking the Remaining Battery Power
To the status of the remaining battery power is shown as an
icon on the upper status bar. However to view the accurate
power level, go to: Start -> Settings -> System -> Power. The
status of the remaining power will show as a bar.
Routine Battery Charge
The battery is fully charged after four hours. During the
charge, the Status LED inside the Power Button shows steady
red and turns green when charging is completed.
Do not store the HC700-G for more than two weeks
!
with battery installed. Storing the HC700-G with
Caution
battery installed for more than two weeks without
charging may damage the battery.
Important: The battery will not charge if the HC700-G is
not properly docked in the cradle.
C to 35
C).
°
°
7
Advertisement
Table of Contents
