Chapter 2 Set Up; Getting Started; Powering On The Display; Powering Off The Display - Raymarine AXIOM Basic Operation Instructions

Chapter 2: Set up

2.1 Getting started

Powering on the display

When power is available to the MFD but the MFD is switched off, the
Power symbol will be illuminated.
To power on the display:
1. Swipe your finger from left to right across the Power button swipe
area.
The MFD will power up.

Powering off the display

1. Swipe your finger from left to right across the Power button swipe
area.
The Shortcuts menu is displayed.
2. Press and hold the Power symbol until the screen switches off.
Note: When powered off, the unit may still draw a small amount of
power from the battery, if this is a concern unplug the power supply
or switch off at the breaker.
9