Adjustment; Margin Adjustment (First Side; Mechanical Adjsutment) - Canon AM1 Service Manual

Adjustment

NOTE:
• The second side of the 2-sided copy mentioned later
means the second side in the image formation order.
• With this equipment, the second side in the image
formation order at the time of 2-sided copy/print is
equivalent to the first side of the original.
Margin Adjustment (First side;
Mechanical Adjsutment)
1
NOTE:
Make copies using the Cassette 3 and 4, and check that
the left edge margin is 2.5 +/- 1.5 mm.
Feeding direction
of paper
image
< In Case of Nonstandard >
2
NOTE:
• Pull out the cassette.
• Check the scale positions on the spacer Adjustment
Plate.
• Loosen the fixing screw.
• As moving the adjusting plate toward the rear by 1
scale, the left edge margin becomes 1.0 mm smaller.
1x
3
NOTE:
• Tighten the fixing screw.
• Return the cassette to its original position.
• Make copies using the Cassette 3 and 4, and check
that the left edge margin is 2.5 +/- 1.5 mm.
56
Installation
1x