Toshiba TECRA S1 Maintenance Manual page 139

3.11Error Codes and Description
04
05xx
04
05
30xx
01
02
03
04
05
06
07
14xx
01
02
03
04
05
06
07
08
09
10
11
20xx
01
02
03
04
TECRA S1Maintenance Manual
Downloaded from www.Manualslib.com
Data Line Test Fail
Mouse
PS2 Mouse Test Fail
Dual Point Test Fail
SDCard
PCI Device No Exist
SD Card No Exist
Initial SD Card Error
Write SD Card Error
Read SD Card Error
Compare data Error
Lock Function Fail
IrDA Test
2400BPS Test Error
4800BPS Test Error
9600BPS Test Error
19200BPS Test Error
38400BPS Test Error
57600BPS Test Error
115200BPS Test Error
0.576MBPS Test Error
1.152MBPS Test Error
4.000MBPS Test Error
Connect time out
IDE-HDD
Get Parameter Fail !
Write Pattern Error
Data Compare Error
Read Verify Error
manuals search engine
Data Line Test fails.
PS2 Mouse Test fails.
Dual Point Test fails.
SD Card controller does not
exist.
No SD Card is inserted.
No SD Card is inserted or the SD
Card is damaged.
As above.
As above.
As above.
As above.
Failure with the infrared port or
the configuration program is not
executed.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
Failure with the infrared port or
the configuration program is not
executed.
Wrong test parameters are input
by user.
HD is damaged.
HD is damaged.
HD is damaged.
3 Diagnostic Programs
As above.
Replace the mouse.
Check the mouse connection and
repeat the test.
Install the SD Card controller.
Insert the SD Card.
Replace the SD Card and repeat
the test.
As above.
As above.
As above.
As above.
Rerun the configuration program
or check the infrared port.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
Rerun the configuration program
or check the infrared port. Check
the master.
Reinput the correct parameters.
Send the HD for repair.
As above.
As above.
65