Tools And Equipment; Screw Tightening Torque - Toshiba TECRA S1 Maintenance Manual

Personal computer
Hide thumbs Also See for TECRA S1:
Table of Contents

Advertisement

4 Replacement Procedures

Tools and Equipment

For the safety of you and other people in the working environment, it is strongly
recommended to use electrostatic discharge (ESD) equipment. The proper use of this
equipment will ensure successful repair work and reduce the costs for fixing damaged
components. The equipment and tools required for disassembling and reassembling are:
One 2 mm Phillips screwdriver
One 4 mm flat-blade screwdriver
Tweezers (for pulling out screws)
ESD mats (for the floor and work desks)
An ESD wrist strap or heel grounder
Anti-static carpets or flooring
Air ionizers (for highly electrostatic sensitive areas)
A plastic card (in credit card size)

Screw Tightening Torque

To fasten screws, follow the torque values listed below. Overtightening can damage
components and screws. Undertightening can loosen the fastening or make screws come off,
which may result in short circuits or other damage.
M2 (2 mm)
M2.5 (2.5 mm)
M3 (3 mm)
LCD screws
- By DTI
- By Sharp
- By Samsung
M2.5x4 PSP TITE screws
M2.5x6 GIZA TITE screws 0.36 N ・ m (3.5 kgf ・ cm)
4-6
Downloaded from
www.Manualslib.com
0.22 N ・ m (2.2 kgf ・ cm)
0.36 N ・ m (3.5 kgf ・ cm)
0.51 N ・ m (5.0 kgf ・ cm)
0.153 N ・ m (1.5 kgf ・ cm)
0.092 N ・ m (0.9 kgf ・ cm)
0.153 N ・ m (1.5 kgf ・ cm)
0.204 N ・ m (2.0 kgf ・ cm)
manuals search engine
4.1 General
TECRA S1 Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents