Table of Contents
Advertisement
WWW.FREESERVICEMANUALS.INFO
6.
NOTES ON HANDLING THE LASER DIODE
[LASER UNIT (D5104)]
The laser diode may suffer electrostatic breakdown because of the
potential difference generated by the charged electrostatic load, etc.
on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
6-1.
Soldering Conditions of Laser Unit (D5104)
Temperature of
the Soldering Iron
Time to Solder
Interval to Solder
Note: Adjustment is needed when laser unit (D5104) is replaced.
Refer to "18. AF Laser Output Adjustment" and "19. AF Laser
Axis Check" of SERVICE MANUAL, ADJ (992999551.pdf).
Less than 350 °C
3 seconds
Next terminal is soldered after
waiting for 1 second
Laser Unit
(D5104)
Worlf of free manuals
12/2
DCR-IP210/IP210E/IP220/IP220E
1-3
WWW.NOSTATECH.NL
Advertisement
Table of Contents
