Advertisement
Advertisement
Table of Contents
Related Manuals for Jet-tech X-33
Summary of Contents for Jet-tech X-33
- Page 1 LOW TEMP DISHWASHERS Manual 2015/July...
- Page 2 Jet-Tech X-33 dishwasher. Jet-Tech dishwashers have been used dependably for many years. This manual has been written to help YOU, the operator, perform your job more efficiently, because your job is one of the “most important” in the restaurant.
- Page 3 Index 2 Introduction 3 Index 4 Warranty 5 Specifications 6 To start 7 Installation, Electrical 8 Plumbing 9 Chemicals 10 Operation, Maintenance 11 Trouble shooting 11 Contact Information 12 Electrical diagram 13 Parts view 1 14 Parts View 2 15 Parts List...
-
Page 4: Manufacturer's Limited Warranty
Systems, within the continental United States of America or Canada; provided that: prior authorization for this labor was approved by Jet-Tech Systems, the service work was performed by an authorized Jet Tech service agency; and that this agency installed an original and genuine Jet Tech part in the machine. Any repair work performed by a non-authorized service depot remains the sole responsibility of the user, and Jet Tech Systems will not be held responsible. - Page 5 X-33 cleans your dishes and glasswares. This model is excellent for small restaurants, fast food operations, institutions, nursing homes, etc. HIGHLIGHT FEATURES Fully automatic washing and rinsing operation with integrated chemical injection system. Wash tank heater to ensure and maintain proper Temperature.
-
Page 6: Getting Started
Getting Started Immediately upon receipt of your new X-33 dishwasher, remove the cardboard box and inspect the dishwasher for any obvious signs of damage. If you find any traces of damage, contact the transport company that delivered the dishwasher to your location. -
Page 7: Installation
Installation This dishwasher must be installed on a level, rigid, non- Counter flammable surface (i.e.:ceramic tiles, concrete, sheet metal, etc) . Ensure that the machine is level by installing the feet (shipped in the wash tank of the machine) and adjusting them. -
Page 8: Water Inlet
DRAIN The X-33 will pump the drain water manually or automatically. A 1" ID flexible drain hose (included) is recommended to facilitate maintenance and servicing of the machine. It is important not to reduce the size of this hose. -
Page 9: Installation Checklist
Chemical hook-up This unit is equipped with three (3) chemical pumps; located behind the bottom panel (below the door). Each will inject a different chemical product at a specific time during the wash and rinse cycle. The chemical pumps have sufficient length of tubing hose which can be inserted into gallon size containers, near the dishwasher. -
Page 10: Operation
Operation Fill the dishwasher; To begin, you need to turn the black swivel switch clockwise a quarter turn to the ON position. Fill the wash tank with water by pressing the round black fill button (on the left side). Open the door to monitor the water level, push and hold the black fill button until the water has reached an inch above the bottom. -
Page 11: Troubleshooting
Removing panels will expose wires and live current. The breaker switch should be switched off or fuses removed before removing the panels. The water supply must also be turned off. Phone: Phone: CONTACT INFORMATION 1-888-275-4538 1-888-275-4538 514-737-9701 514-737-9701 Fax: Fax: 514-737-2792 514-737-2792 www.jet-tech.com www.jet-tech.com service@jet-tech.com service@jet-tech.com... -
Page 12: Electrical Schematics
1 888 275 4538 - 611 514 737 9701 - 611 Electrical Schematics FAX 514 737 2792... - Page 13 Exploded View 1...
-
Page 14: Exploded View
Exploded View 2... -
Page 15: Parts List
60233 WASHER 16674 WASH COLUMN X-33 60235 WASHER 16675 COUNTER-FLANGE WASH COL.X-33 60244 WASHER 16677 NIPLO X-33 1/2" PG13 1/2-1/8" 60245 WASHER 16678 RUBBER-CARRIER 1/2" CORR.PIPE 60552 RED HOSE 5X7 X-32/X-33 16679 RUBBER-CARRIER PG13 1/2-18/1" 60553 BLUE HOSE 5X7 X-32/X-33 16682 CORRUGATED PIPE+NUT+GASK.X-33... - Page 16 2007...