Set Do Pulse Output Counts - Advantech ADAM 4100 User Manual

4.6.19
$AAERFFccvvvvvvvv
Set DO current pulse output counts
Name
$AAERFFccvvvvvvvv (cr)
Syntax
$ is a delimiter character.
AA (range
hexadecimal address which is to be accessed.
ERFF is the DO current pulse output counts command
cc is the channel number (00~07 means Ch0~Ch7)
vvvvvvvv: 8-hex character pulse output value. When it is set
to 0, it will operate as continuous pulse output
(cr) is the terminating character, carriage return (0Dh).
!AA if the command was valid.
Response
?AA(cr) if an invalid command has been issued.
There is
syntax
specified address does not exist.
! is a delimiter character indicating that a valid command was
received.
? is a delimiter character indicating that the
command was invalid.
AA (range
character hexadecimal address of the digital I/O module.
00-FF) represents
no response if the
or communication error,
00-FF) represents
Chapter 4
4
Chapter
the 2-character
module detects a
or even if the
the responding 2-
Command Set 4-59