Command Set
4.6.20
$AAERFFcc
Read DO current pulse output counts
Name
$AAERFFcc (cr)
Syntax
$ is a delimiter character.
AA (range
hexadecimal address which is to be accessed.
ERFF is the DO current pulse output counts command
cc is the channel number ( 00~07 means Ch0~Ch7)
(cr) is the terminating character, carriage return (0Dh).
>AAmvvvvvvvv if the command was valid.
Response
?AA(cr) if an invalid command has been issued.
There
is
syntax
specified address does not exist.
> is a delimiter character indicating that a valid
command was received.
m: 0 means non-continue mode
1 means continue mode
vvvvvvvv: 8-hex character pulse output value. When it is set
to 0, it will operate as continuous pulse output
? is a delimiter character indicating that the
command was invalid.
AA
(range
character hexadecimal address of the digital I/O module.
4-60 ADAM 4100 Series User's Manual
00-FF)
represents
no
response
if
the
or communication
error,
00-FF)
represents
the
2-character
module
detects
a
or
even
if
the
the
responding
2-