Advantech ADAM 4100 User Manual page 6

Introduction
Overview
The ADAM-4100
sensor-to- computer interface units designed specifically for reliable operation in
harsh environments. Their built-in microprocessors, encased in rugged industrial
grade plastic,
conditioning, analog I/O, digital I/O, LED data display and located mode
to show their address. Especially, the located mode is friendly design for
use to read module address directly.
Modular Industrial Design
The ADAM-4100 series are designed to endure the more adverse
circumstances and to hold the more robust design. User can make use of
them under special circumstances to fit more widespread application.
Ready for the Industrial Environment

Environment Monitoring Low Operating Temperature
ADAM-4100 series can support broad Operating Temperature range
0 0
from –40 C to +85 C

High Noise Immunity
In order to get over the noise resulted from special environmental, the
ADAM-4100 provide the more protection to counteract these effects
like as 1KV Surge Input, 3KV EFT and 8KV ESD Protection

Broad power input range
The ADAM-4100 series modules accept any unregulated power source
between +10 and +48 V
also protected from accidental power supply reversals and can be safely
connected or disconnected without disturbing a running network.

The new features for individual I/O modules
Support 200Vdc Hi Common Mode Voltage (ADAM-4117)
Support Uni-polar and Bi-polar input (ADAM-4117)
Support +/- 15V Input Range (ADAM-4117)
Support Filter Auto-tuning or Filter-out 50Hz/60Hz (ADAM-4117/4118)
Digital Filter Function (ADAM-4150)
DI channels allow to be used as 3 KHz counter (ADAM-4150)
DO channels support pulse output function (ADAM-4150 / 4168)
1-2 ADAM 4100 Series User's Manual
series modules are
independently provide
. They are not only widened the input range but
DC
compact, versatile
intelligent signal