Advantech ADAM 4100 User Manual page 97

4.6.17
$AA9n
Read pulse output input width
Name
$AA9n (cr)
Syntax
$ is a delimiter character.
AA (range
hexadecimal address which is to be accessed.
9 is the DI filter input command
n is the channel n
(cr) is the terminating character, carriage return (0Dh).
!AA(lw)(hw)(ld)(hd)(cr) if the command was valid.
Response
?AA(cr) if an invalid command has been issued.
There is
syntax
specified address does not exist.
! is a delimiter character indicating that a valid command was
received.
(lw): 8-hexadicimal chrs Low Width=>0x0~0xffffffff
(hw): 8-hexadicimal chrs High Width=>0x0~0xffffffff
(ld): 8-hexadicimal chrs Low Delay=>0x0~0xffffffff
(hd): 8-hexadicimal chrs High Delay=>0x0~0xffffffff
Unit: 0.1ms
? is a delimiter character indicating that the
command was invalid.
AA (range
character hexadecimal address of the digital I/O module.
00-FF) represents
no response if the
or communication error,
00-FF) represents
Chapter 4
4
Chapter
the 2-character
module detects a
or even if the
the responding 2-
Command Set 4-57