Timeguard TRT05 Installation & Operating Instructions Manual page 6

Use 'Temp' or 'Mode' to set the time, using 'Prog'
to change between hours and minutes.
Press 'Prog' to change to program 1 off time.
Use 'Temp', 'Mode' and 'Prog' to set the off time.
Press 'Prog' to scroll through program 2 on,
program 2 off, program 3 on, program 3 off,
adding in times as required.
Press 'Prog' to exit program mode.
At any time during programming, if the 'Prog'
button is held down for 3 seconds, the TRT05 will
5
return to operating mode.
The display will now show:
Where the time is correct, and the on/off indicator
reflects the current program. The default mode
when leaving programming is Auto, depicted by
an 'A' on the display.