Factory Presets - Minelab x-terra 305 Instruction Manual

FACTORY PRESETS

63
The settings Sensitivity, Ground
Balance, Noise Cancel, Threshold,
Volume and Tones are saved when
the X‑TERRA is switched off. To
return to the preset menu values:
Turn the detector off.
Press and hold Press
once
While pressing and holding
Menu
, turn the detector back
on, by pressing Power
once.
During the start up sequence,
release Menu
.
After the start up sequence, the
factory preset message (FP), will
appear for 3 seconds to indicate
that Sensitivity, Ground Balance,
Noise Cancel, Threshold, Volume
and Tones have returned to the
preset values.