Care Of Your X-Terra - Minelab x-terra 305 Instruction Manual

CARE OF YOUR X‑TERRA
70
The X‑TERRA is a high quality electronic
instrument, finely engineered and packaged in
a durable housing. Taking proper care of your
X‑TERRA is common sense.
The X‑TERRA's storage temperature is –4˚F to
149˚F (–20˚C to +65˚C) and the operating
temperature is 32˚F to 113˚F (0˚C to 45˚C).
Do not leave the detector in excessive heat
or cold for longer than necessary. Try to
avoid leaving it in a closed trunk or in a car
sitting in sunlight. Covering it when not in
use will help protect it.
The coil can be submersed in water up
to 20" (0.5m), yet the control box is not
waterproof. Although it has been designed
to be weather resistant, it is advised to
protect the control box in wet conditions.
A protective control box cover is available.
(Accessories, p. 72)
Never allow the detector to come into
contact with gasoline or other petroleum
based liquids.
Keep the detector clean and dry and avoid
getting sand and grit into the shafts or
fastenings (e.g. yoke, twistlocks). Do not use
solvents to clean the detector. Use a damp
cloth with mild soap detergent.