Mitsubishi Electric PLA-A12EA7 Service Manual page 90

10 AIR FLOW DATA
4. Change of outlet numbers
The optional air outlet is necessary.
To change the air outlet number to 3-, or 2-way outlet, the
outlet number should be closed with the operational air
outlet shutter.
When the air outlets are closed, close the vane by
removing the vane connector.
Connector
Connector
5. Branch duct and change of outlet numbers
<4- way air flow and branch duct>
Air
outlet
Branch
Air intake
duct
<3- way air flow and branch duct>
Branch
Air intake
duct
Air
Air
outlet
outlet
closed
position
<2- way air flow and branch duct>
Branch
Air intake
duct
Air
Air
Air
outlet
outlet
outlet
closed
closed
closed
position
position
position
Due to continuing improvement, above specification may be subject to change without notice.
90
Button
Vane motor
Up/down vanes
Vane motor
Button
Branch duct should be connected to one of the branch duct holes on the main unit.
Close the outlet on the side of branch duct and air flows in 3 directions.
The outlet on the side of branch duct and one of the other outlets are closed.
Air flows in 2 directions.
P-Series (March 2017)
Indoor unit
Outlet concave
portion
Air outlet shutter plate
(Option)
© 2017 Mitsubishi Electric US, Inc.