Hedge Trimmer Attachment; Brush Cutter/Grass Trimmer Attachments - Eckman EKEMS2 Instruction Manual

WARNING
It is very important to maintain the proper chain tension. Rapid wear of the guide bar or the
chain coming off easily can be caused by improper tension. Especially when using a new
chain, take good care as it will expand when first used.
VII. HEDGE TRIMMER ATTACHMENT
This comes supplied fully assembled. For service-top up with a grease gun via the
grease nipples every 6 months/20hrs use.(Photo 11)
Cutting device
Cutting
Blade
guide bar
tooth
Adjusting the hedge trimmer
The cutting angle can but adjusted by loosening the locking ratchet adjustment.
Adjust the angle then lock the ratchet adjustment firmly in position.(Photo 12)
VIII. BRUSH CUTTER/GRASS TRIMMER ATTACHMENT
1) Assemble the safety guard
The safety guard is made up of three parts and require assembly.
First attach metal to the groove of the safety guard using four bolts supplied.
Control
handle
Gear
Photo 11
- 14 -
Photo 12