Technical Data; Assembly - Eckman EKEMS2 Instruction Manual

Before assembly firstly unpack and check all parts have been supplied. If you think any parts
are missing, check the packaging again before calling the Eckman helpline on 0844 441 3011.
IV. TECHNICAL DATA
ECKMAN Code/Factory Code
Rated Voltage
Rated Power:
No Load Speed of Power Unit
Set Weight (without power cord)
Power Unit
Hedge Trimmer Maximum Recommended
Twig Cutting Diameter
Extra Extension Pole
Brush Cutter
Grass Trimmer
Chainsaw Pruner
Hedge Trimmer
Measured Sound Power
Guaranteed Sound Power
Vibration Level
V. ASSEMBLY
It is necessary to fit the handle to the power unit and safety guard to the brush cutter/grass trimmer
accessory if you purchased this optional accessory set.
1) Fitting the "D"handle to power unit
EKEMS2/SF7A214
230V~ 50Hz
1200W
5800rpm
9.04 kg
Weight of power unit(without power cord) :3.25kg
Overall length of power unit: 90cm
20mm / ¾".
Length 100cm
No load speed:5800rpm Cutting diameter :400mm
Weight with 60cm pole approx.1.71kg
Weight with 60cm pole approx.1.71kg
Cutting length:220mm（10''Oregon bar and chain）
Weight with 55cm pole approx.1.6kg
Cutting length:400mm
40cm long reciprocating blade with full blunt
extension protection
270 degree angle-adjustable
Weight with 40cm pole approx 1.93kg
95 dB L
WA
96 dB L
WA
2
6,749 m/s
- 10 -