Ix.connection; Operation - Eckman EKEMS2 Instruction Manual

3) Fitting the safety guard to the grass trimmer
If you use the unit as a grass trimmer follow the instructions below:
1. Loosen the blade retainer nut clockwise and remove the blade retainer.
2. Mount the grass trimmer head and tighten it.(see photo 22-23)
Photo 22
Note: Please store the blade retainer and nut in a safe place.
WARNING! Do not use the line cutting head without the plastic guard.
IX CONNECTION
.
This machine may only be connected to single-phase 230VAC 50Hz UK Mains outlet. Ensure
that the mains voltage is the same as the operating voltage indicated on the rating plate.
X. OPERATION
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury and invalidate your guarantee.
Switching on
Squeeze the trigger lockout, then squeeze the trigger.
Switching off
Release the trigger or the trigger lockout. Either will stop the machine.
(see photo 25)
Photo 23
- 16 -