Maintain Trimmer With Care; Check Damaged Parts - Eckman HDT01 Owner's Manual

Once the Trimmer is cleaned, apply a high coat of oil to the cutter blades to prevent rust and provide
lubrication.
MAINTENANCE AND STORAGE OF TRIMMER

1. Maintain Trimmer With Care

● Keep cutting edge sharp and clean for best performance and to reduce the risk of
injury.
● Periodically apply a light coat of oil to the cutter blades for lubrication.
● Inspect Trimmer cord periodically, and if damaged, have it repaired by
an authorized service facility.
● Inspect extension cords periodically and replace if damaged.
● Keep handles dry, clean, and free from oil and grease.

1. Check Damaged Parts

● If a part is damaged, carefully check the damaged part before using the
Trimmer. Make sure the part will operate properly and perform its
intended function. If necessary, please contact the place of purchase to
request a replacement part. There may be a charge.
● Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its operation.
2. When servicing Trimmer, use only identical replacement parts.
3. When not in use, store your trimmer :
4. in a dry location
- out of the reach of children
- away from chemicals and petro
GUARANTEE:
This product is designed for domestic use only and guaranteed as such against faulty
workmanship for a period of 12 months from date of purchase.
Your statutory rights remain unaffected.
This product is imported and distributed by T2 Direct Ltd -London
Any questions or problems – please call the Eckman Helpline on 0871 590 5917 or go to
www.eckman.co.uk
9