Advertisement
QuickSpecs
Core Options
HP Networking
HP InfiniBand
HP Power Supplies
Gigabit Ethernet adapters
HP NC112T PCIe Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit
Server Adapter NICs allowed in this server.
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant
server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per
each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers
and cables for fiber-optic environments must be purchased separately.
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
www.hp.com/go/ProLiantNICs
HP IB 4X DDR PCI-e Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP 1200W 12V Hot plug AC Power Supply
NOTE: Three additional power supply units are required for full redundancy.
NOTE: If you require a local power cord, please check the Power Specifications
below for the appropriate country-specific power cord, or consult the Power Cord
Matrix: http://www.hp.com/go/powercordmatrix.
DA - 13046
Worldwide QuickSpecs — Version 25 — 8/16/2010
HP ProLiant DL785 Generation 5
503746-B21
412648-B21
435508-B21
394793-B21
394791-B21
458492-B21
468332-B21
409376-B21
437572-B21
Page 18
Advertisement
